Stenso - Hovedkatalog 2019

Limitations on Use : Temperature : -40 to +200 °C (depending on O-ring material) Velocity reciprocating to 15 m/s Recommended sizes for Installation Section A B C D E F 1,78 2,62 3,53 5,33 7,00 8,40 3,7 5,0 6,0 8,4 11,0 14,0 2,4 3,4 4,4 6,1 8,0 10,0 0,4 0,4 0,4 0,4 0,4 0,4 2,0 2,0 3,0 3,0 4,0 5,0 6 - 12 - 65 - 251 - 421 - 651 - 11,9 64,9 250,9 420,9 650,9 O-Ring cross-section-ø mm E mm Groove Width L mm Groove Depth b mm Bar Width Radius R1 max. mm Diameter Standard D mm Recommended Part N°. d f8/h9 D H10 E +0,2 D1 +0,2 O-Ring 6,00 10,80 3,70 8,70 011 AF-480-0060-A-5640N 8,00 12,80 3,70 10,70 012 AF-480-0080-A-5640N 10,00 14,80 3,70 12,70 013 AF-480-0100-A-5640N 12,00 18,80 5,00 15,50 113 AF-480-0120-B-5640N 14,00 20,80 5,00 17,50 115 AF-480-0140-B-5640N 15,00 21,80 5,00 18,50 115 AF-480-0150-B-5640N 16,00 22,80 5,00 19,50 116 AF-480-0160-B-5640N 18,00 24,80 5,00 21,50 117 AF-480-0180-B-5640N 20,00 26,80 5,00 23,50 118 AF-480-0200-B-5640N 22,00 28,80 5,00 25,50 120 AF-480-0220-B-5640N 25,00 31,80 5,00 28,50 121 AF-480-0250-B-5640N 26,00 32,80 5,00 29,50 122 AF-480-0260-B-5640N 28,00 34,80 5,00 31,50 123 AF-480-0280-B-5640N 30,00 36,80 5,00 33,50 125 AF-480-0300-B-5640N 32,00 38,80 5,00 35,50 126 AF-480-0320-B-5640N 35,00 41,80 5,00 38,50 127 AF-480-0350-B-5640N 36,00 42,80 5,00 39,50 129 AF-480-0360-B-5640N 37,00 43,80 5,00 40,50 129 AF-480-0370-B-5640N 38,00 44,80 5,00 41,50 130 AF-480-0380-B-5640N 40,00 46,80 5,00 43,50 131 AF-480-0400-B-5640N 42,00 48,80 5,00 45,50 132 AF-480-0420-B-5640N 45,00 51,80 5,00 48,50 134 AF-480-0450-B-5640N 48,00 54,80 5,00 51,50 136 AF-480-0480-B-5640N 50,00 56,80 5,00 53,50 137 AF-480-0500-B-5640N 52,00 58,80 5,00 55,50 138 AF-480-0520-B-5640N 55,00 61,80 5,00 58,50 140 AF-480-0550-B-5640N 56,00 62,80 5,00 59,50 141 AF-480-0560-B-5640N 58,00 64,80 5,00 61,50 142 AF-480-0580-B-5640N L AF-480 177 Wiper Surface Finish Surfaces Rmax Rz 2,5 µm 10,0 µm 16,0 µm 1,6 µm 6,3 µm 10,0 µm 0,4 µm 1,6 µm 3,2 µm Ra Rod diameter d Groove diameter D Groove flanks Media for Use Mineral oil based pressure fluids, flame resistant fluids (HFA, HFB, HFC), non-polluting pressure fluids (Bio Oils), water, air and other media (depending O-ring material).