Stenso - Hovedkatalog 2019

194 FB Guide Strip Example for ordering rolls or / meter: PTFE/bronze 2.5 x 9.7 mm FB 9,7 x 2,5 - 5640 - Y Type Groove width Radial depth Standard material Metres Example for ordering Ready to use cut outs: e.g.: piston Guide strip 2.5 mm for cylinder Ø 63 mm; groove width 9.7 mm FB 63 / 58 x 9,7/X - 5640 Type Bore diameter D Groove diameter d groove width/cut Standard material e.g..: Rod Guide strip 2.5 mm for rod Ø 50 mm; groove width 9.7 mm FB 50 / 55 x 9,7/X - 5640 Type Rod diameter d Groove diameter D Groove width/cut Standsrd material Note: Standard ready to use cut outs are delivered by factory with bevel cut (standard) with due consideration to split "m". Stright cut 90 degree is Y Z-cut is Z Standard cut is X Material Key: Guide strip AF-2426-PTFE carbon AF-5640-PTFE bronze Material Key: Guide strip AF-2426-PTFE carbon AF-5640-PTFE bronze WARNING vice conditions. In the event of a large duty cycle, pulsating operation and other complex operational conditions, simultaneous transgression of these values is not recommended. Due to a large variety of service conditions that may arise in course of actual use, the company does not take responsibility of or guarantee the functional accuracy of the individual components. Rights for changes are reserved. : Limits of application stated herein are standard values. They could be individually transgressed with due consideration to respective ser-