Stenso - Hovedkatalog 2019

Limitations of Use Media for Use Surface Finish Operational pressure : up to 10 MPa (100 bar) Velocity : rotary to 4 m/s Temperature : -150 up to +255 °C Mineral based and synthetic pressure fluids, water, air, steam,acids and various chemicals depending on sealing and O-ring material. Surface Rmax Rz 1,5 µm 5,0 µm 16,0 µm 0,8 µm 3,2 µm 10,0 µm 0,2 µm 0,8 µm 3,2 µm Ra Rod diameter d Groove diameter D Groove flanks Tolerances Nominal diameter d f8/h9 D H11 +0,2 E - 0 Groove diameter Groove width Standard dimensions O-Ring equivalen t mm Section B C D E 2,62 3,53 5,33 6,99 2,50 3,50 + 0,08 5,25 + 0,10 7,00 + 0,10 + 0,05 0,85 - 0,10 1,35 - 0,15 1,80 - 0,20 2,80 - 0,20 4,50 + 0,08 6,25 + 0,10 8,75 + 0,15 11,00 + 0,15 0,80 1,10 1,40 1,60 0,13 0,15 0,17 0,25 0,3 0,4 0,5 0,5 3,60 4,80 7,10 9,50 Groove Width E mm Groove Depth L mm Flange Width e mm Flange Depth L1 mm Width F mm Max. Diameter Clearance S mm Radius R1 max. mm 8 - 20 - 40 - 400 - 19,9 39,9 399,9 699,9 Recommend Diameter Standard D mm Futher and intermediate sizes up to Ø 2500 mm available on request. Example for ordering: AF-610R - 0360- C - 1022 VS Type Nominal diameter x 10 ASL-Seal body S Cross-section ASL-Seal body pring design (Standard) ASL-Seals Spring-activated rod seal for rotation 282 WARNING vice conditions. In the event of a large duty cycle, pulsating operation and other complex operational conditions, simultaneous transgression of these values is not recommended. Due to a large variety of service conditions that may arise in course of actual use, the company does not take responsibility of or guarantee the functional accuracy of the individual components. Rights for changes are reserved. : Limits of application stated herein are standard values. They could be individually transgressed with due consideration to respective ser- Spring construction: S - Standard H - for aggressive media Q - Standard silicone cast E - for aggressive media For silicone filled seals please add Q after VS. Material Key: ASL-Seal body AF-2426 - PTFE with carbon AF-2413 - PFTE with carbon fiber AF-1111 - PTFE with Econol AF-1022 - PTFE with additive AF-7710 - PEHD 1000 (uhmwpe)